Coffin Drawer Pull || gothic home decor kitchen cabinet knob pull dresser handle halloween decoration decorative cupboard pull casket

Coffin Drawer Pull

  • $8.50
    Unit price per 


Dresser and cabinet hardware is usually very basic and boring, but it doesn't have to be! With our Coffin Drawer Pulls you can grab hold of the dead whenever you need to get into your drawer of stakes or the garlic cupboard. Get rid of your run of the mill pulls and adorn your furniture with the elegance and spookiness of a coffin! There is even an inlaid gothic cross for added fun! They are reversible so you can have the coffins facing either way and they also look amazing when mounted vertically.
* Price is per pull

Size & Materials
The size of the coffin drawer pull is approximately 157.7x69.6x29.1mm (6.21 x 2.74 x 1.15 inches) for the 96mm screw centre-to-centre version and comes with a set of 8-32x3/4 and 8-32x1 inch zinc machine screws for cabinets or drawers from 0.4 up to 0.78 inches thick. The 76mm screw centre-to-centre version will be slightly smaller in size. Layer by layer this coffin is 3D printed using PLA (polylactic acid) which is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch. It takes just over 6 hours to print each coffin.

NOTE: The screws will be very tight on first use as they follow the shallow thread that is inside the hole and cut their own deeper thread in the plastic to hold tightly.

🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ Welcome to the Cursed By Design Hardware Centre!
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ KNOBS (SINGLE POST)
🚪 Bat Knobs 🦇: https://etsy.me/31WHW1A
🚪 Coffin Knobs ⚰️: https://etsy.me/2DkV3PM
🚪 Spider Knobs 🕷️: https://etsy.me/3f8Qje9
🚪 Skull Knobs 💀: https://etsy.me/3f9YZAF
🚪 Ghost Knobs 👻: https://etsy.me/2Z9gSu7
🚪 Gothic Cross Knobs ✝️: https://etsy.me/3edxqFj
🚪 Triple Moon Knobs 🌛🌕🌜: https://etsy.me/3iDA5eZ
🚪 Ouija Planchette Knobs 🖤: https://etsy.me/2ZQBV3J
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ PULLS (DUAL POST)
🚪 Bat Pulls 🦇: https://etsy.me/3gzPKKy
🚪 Coffin Pulls ⚰️: https://etsy.me/3iIeBxt
🚪 Triple Moon Pulls 🌛🌕🌜: https://etsy.me/2VY6PpI
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
💡 LIGHT SWITCH COVERS
🚪 Bat Switch Cover 🦇: https://etsy.me/2ZQ8Oxd
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪

Disclaimer
The 3D printing process is not perfect so there may be blemishes in the surface finishes and visible layer lines. Items will not be exactly as pictured and as much as we try to take colour accurate photos, the colour may be slightly different than viewed on your screen.

FREE LOCAL PICKUP IN TORONTO
Enter coupon code TORONTO at checkout and you will be sent the local pickup address in the Cabbagetown - Leslieville - Regent Park - Cork Town - Distillery District area of Toronto, Ontario.

Materials: PLA, Polylactic Acid, EcoTough, zinc machine screw.


We Also Recommend