Bat Drawer Pull • Gothic Home Hardware Decor • 3D Printed

Dresser and cabinet hardware is usually very basic and boring, but it doesn't have to be! With our Bat Drawer Pulls you can have the satisfaction of grabbing hold of a bat every time you need a pair of socks or a can of creamed corn. Get rid of your run of the mill pulls and adorn your furniture with the elegance and spookiness of a bat!

Not sure what size to order?
The drawer pull measurement needed is how far apart the screws on your pull will be center to center. To find this, measure from the center of one screw, (or the center of the existing hole), to the center of the other screw, (or the center of the other existing hole). If the size you need is not listed, please select custom’ in the drop down menu and type the size in the personalization box.

* Price is per pull

Size & Materials
The size of the bat drawer pull is approximately 157.7x58.0x29.1mm (6.21 x 2.28 x 1.15 inches) for the 96mm screw center=to=center version and comes with a set of 8-32x3/4 and 8-32x1 inch zinc machine screws for cabinets or drawers from 0.4 up to 0.78 inches thick. The 76mm screw center=to=center version will be slightly smaller in size. Layer by layer this bat is 3D printed using PLA (polylactic acid) which is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch. It takes just over 5 hours to print each bat.

NOTE: The screws will be very tight on first use as they follow the shallow thread that is inside the hole and cut their own deeper thread in the plastic to hold tightly.

🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ Welcome to the Cursed By Design Hardware Centre!
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ KNOBS (SINGLE POST)
🚪 Bat Knobs 🦇: https://etsy.me/31WHW1A
🚪 Coffin Knobs ⚰️: https://etsy.me/2DkV3PM
🚪 Spider Knobs 🕷️: https://etsy.me/3f8Qje9
🚪 Skull Knobs 💀: https://etsy.me/3f9YZAF
🚪 Ghost Knobs 👻: https://etsy.me/2Z9gSu7
🚪 Gothic Cross Knobs ✝️: https://etsy.me/3edxqFj
🚪 Triple Moon Knobs 🌛🌕🌜: https://etsy.me/3iDA5eZ
🚪 Ouija Planchette Knobs 🖤: https://etsy.me/2ZQBV3J
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ PULLS (DUAL POST)
🚪 Bat Pulls 🦇: https://etsy.me/3gzPKKy
🚪 Coffin Pulls ⚰️: https://etsy.me/3iIeBxt
🚪 Triple Moon Pulls 🌛🌕🌜: https://etsy.me/2VY6PpI
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
💡 LIGHT SWITCH COVERS
🚪 Bat Switch Cover 🦇: https://etsy.me/2ZQ8Oxd
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪

Disclaimer
The 3D printing process is not perfect so there may be blemishes in the surface finishes and visible layer lines. Items will not be exactly as pictured and as much as we try to take colour accurate photos, the colour may be slightly different than viewed on your screen.