Triple Moon Goddess Drawer Pull • Gothic Home Hardware Decor • 3D Printed

Dresser and cabinet hardware is usually very basic and boring, but it doesn't have to be! With our Triple Goddess Moon Drawer Pulls you can keep it witchy while gathering your special ingredients from all the drawers, cupboards, cabinets, and chests. Get rid of your run of the mill pulls and adorn your furniture with the Triple Moon Goddess! Depending on your affiliation, the pull can be rotated so the star is facing the way you prefer.

Not sure what size to order?
The drawer pull measurement needed is how far apart the screws on your pull will be center to center. To find this, measure from the center of one screw, (or the center of the existing hole), to the center of the other screw, (or the center of the other existing hole). If the size you need is not listed, please select custom’ in the drop down menu and type the size in the personalization box.

* Price is per pull

Size
The size of the triple moon goddess drawer pull is approximately 172x78x29.1mm (6.77 x 3.07 x 1.15 inches) for the 96mm screw center-to-center version and comes with a set of 8-32x3/4 and 8-32x1 inch zinc machine screws for cabinets or drawers from 0.4 up to 0.78 inches thick. The 76mm screw center-to-center version will be slightly smaller in size. Larger sizes will be larger; ask with the size you need for exact measurements.
Layer by layer this drawer pull is 3D printed using PLA (polylactic acid) which is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch. It takes just over 5 hours to print each pull.

NOTE: The screws will be very tight on first use as they follow the shallow thread that is inside the hole and cut their own deeper thread in the plastic to hold tightly.

🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ Welcome to the Cursed By Design Hardware Centre!
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ KNOBS (SINGLE POST)
🚪 Bat Knobs 🦇: https://etsy.me/31WHW1A
🚪 Coffin Knobs ⚰️: https://etsy.me/2DkV3PM
🚪 Spider Knobs 🕷️: https://etsy.me/3f8Qje9
🚪 Skull Knobs 💀: https://etsy.me/3f9YZAF
🚪 Ghost Knobs 👻: https://etsy.me/2Z9gSu7
🚪 Gothic Cross Knobs ✝️: https://etsy.me/3edxqFj
🚪 Triple Moon Knobs 🌛🌕🌜: https://etsy.me/3iDA5eZ
🚪 Ouija Planchette Knobs 🖤: https://etsy.me/2ZQBV3J
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ PULLS (DUAL POST)
🚪 Bat Pulls 🦇: https://etsy.me/3gzPKKy
🚪 Coffin Pulls ⚰️: https://etsy.me/3iIeBxt
🚪 Triple Moon Pulls 🌛🌕🌜: https://etsy.me/2VY6PpI
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
💡 LIGHT SWITCH COVERS
🚪 Bat Switch Cover 🦇: https://etsy.me/2ZQ8Oxd
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪

Disclaimer
The 3D printing process is not perfect so there may be blemishes in the surface finishes and visible layer lines. Items will not be exactly as pictured and as much as we try to take colour accurate photos, the colour may be slightly different than viewed on your screen.