Bat Skeleton Key Drawer Pull • Gothic Home Hardware Decor • 3D Printed

Dresser and cabinet hardware is usually very basic and boring, but it doesn't have to be! With our Skeleton Key Drawer Pulls you can have the satisfaction of grabbing hold of a key every time you need a pair of socks or a can of creamed corn. Get rid of your run of the mill pulls and adorn your furniture with the elegance and spookiness of a skeleton key!
* Price is per pull

Not sure what size to order?
The drawer pull measurement needed is the distance between the screws, center-to-center. To find this, measure from the center of one screw (or the center of the existing hole) to the center of the other screw (or the center of the other existing hole). If the size you need is not listed, send us a message with the size you need, and we can make it happen!

Size & Materials
The size of the skeleton key drawer pulls are approximately 157x72x29mm (6.21 x 2.83 x 1.15 inches) and come with a set of 3/4" and 1" screws for cabinets or drawers from 0.4 up to 0.78 inches thick. If you are purchasing multiple quantities, you can choose whether you want them in the same direction (best for drawers) by just choosing the size or opposite directions (best for facing cabinets) by choosing the size and opposite. Take a look at the photos for a visual representation of this.

Layer by layer these pulls are 3D printed using PLA (polylactic acid) which is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch. It takes just over 5 hours to print each skeleton key.

NOTE: The screws will be very tight on first use as they follow the shallow thread that is inside the hole and cut their own deeper thread in the plastic to hold tightly.

🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ Welcome to the Cursed By Design Hardware Centre!
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ KNOBS (SINGLE POST)
🚪 Bat Knobs 🦇: https://etsy.me/31WHW1A
🚪 Coffin Knobs ⚰️: https://etsy.me/2DkV3PM
🚪 Spider Knobs 🕷️: https://etsy.me/3f8Qje9
🚪 Skull Knobs 💀: https://etsy.me/3f9YZAF
🚪 Ghost Knobs 👻: https://etsy.me/2Z9gSu7
🚪 Gothic Cross Knobs ✝️: https://etsy.me/3edxqFj
🚪 Triple Moon Knobs 🌛🌕🌜: https://etsy.me/3iDA5eZ
🚪 Ouija Planchette Knobs 🖤: https://etsy.me/2ZQBV3J
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
🗄️ PULLS (DUAL POST)
🚪 Bat Pulls 🦇: https://etsy.me/3gzPKKy
🚪 Coffin Pulls ⚰️: https://etsy.me/3iIeBxt
🚪 Triple Moon Pulls 🌛🌕🌜: https://etsy.me/2VY6PpI
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪
💡 LIGHT SWITCH COVERS
🚪 Bat Switch Cover 🦇: https://etsy.me/2ZQ8Oxd
🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪🚪

Disclaimer
The 3D printing process is not perfect so there may be blemishes in the surface finishes and visible layer lines. Items will not be exactly as pictured and as much as we try to take colour accurate photos, the colour may be slightly different than viewed on your screen.