Skull Succulent Planter

Succulents are the plants of zen, but some of us can not achieve this zen with a round tan ceramic bowl. Some of us need something a little darker to find our zen. So we like to have our succelents growing out of a tiny human skull. If you are still reading this, then you feel the same way! Unfortunately getting our hands on a real shrunken skull (or that of a baby) is not easy and would raise too many questions, the next best thing is one that is 3D printed. Choose your skull colour — white, black, or red — and then give it a relaxing zen hairstyle. There is also a 5mm (1/5″) drainage hole in the bottom rear of the planter.

* Plants are not included

Buy on Etsy
Buy on Etsy
Buy on Amazon
Coming Soon!

The size of the skull is approximately 78x100x74mm (3.07 x 3.94 x 2.91 inches) with a volume of 120ml (1/2 cup) and will comfortably house a small to medium sized succulent. There is a 5mm (1/5″) drainage hole in the bottom rear of the planter.

Layer by layer this skull is 3D printed using PLA (polylactic acid) which is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources, such as corn starch. It takes just over 10 hours to print each planter followed by removing the supports created during the printing process.

Each skull succulent planter is $15 regardless of colour that you choose.

The 3D printing process is not perfect so there may be blemishes in the surface finishes and visible layer lines. Items will not be exactly as pictured and as much as we try to take colour accurate photos, the colour may be slightly different than viewed on your screen.