Death Head Moth Permanent Vinyl Decal || Gothic Home Decor Halloween Decoration Deaths Head Hawkmoth Sticker

Death Head Moth Permanent Vinyl Decal

  • $5.00
    Unit price per 

The size of the death head moth vinyl decal is approximately 180x90mm (7.1x3.5 inches) with an area of approximately 162cm² (25.1 square inches).

Materials & Process
The pattern of the death's head hawkmoth is digitally designed and then cut out of vinyl. The excess vinyl is weeded off and then a layer of transfer tape is applied.

To apply the decal:

1. Thoroughly clean the surface. The surface you are applying the sticker to must be clean, dry & Free of any dust or residue. (Soapy water & a Lint free cloth is best)
2. Your sticker has a protective transfer tape front and paper backing.
3. Rub the front of the sticker to be sure the transfer tape is properly adhered to the sticker.
4. Remove the paper backing Slowly making sure the sticker stays adhered to the transparent transfer tape.
5. Carefully position the sticker to the desired clean area. Once the sticker sticks, it will be nearly impossible to reposition it without destroying the sticker. Rub the sticker from one side to the other, eliminating any air bubbles.
6. Use a hard edged object like a credit card to make sure the entire sticker is fully adhered to the surface.
7. Slowly remove the transfer tape making sure no part of the stickers remains on the transfer tape.

Enter coupon code TORONTO at checkout and you will be sent the local pickup address in the Cabbagetown - Leslieville - Regent Park - Cork Town - Distillery District area of Toronto, Ontario.

Materials: Oracal 651 Vinyl, Oracal Transfer Tape.

We Also Recommend